Plastic bond plastic

PRODUCT DESCRIPTION:BFD3232H is a single component, UV light curable bonding adhesive for plastic application.
TYPICAL PROPERTIES OF UNCURED MATERIAL：
Chemical Type        Acrylate
Appearance             Transparent amber liquid
Viscosity (@ 25℃, mPa.s)       11000±1000
TYPICAL CURING PERFORMANCE                   BFD3232H can be cured by irradiation with ultraviolet of sufficient intensity. To obtain full cure on surfaces exposed to air, the enough intensity of UV radiation at 200 to 400 nm is necessary.
Surface Cure Time            This is the time required to achieve a tack free surface.
TYPICAL PROPERTIES OF CURED MATERIAL：
(Cured 40 seconds @ 100 m W/cm2 using a high pressure mercury light source)
Physical Properties
Hardness (Shore D),             66
Water absorption,            
24 hrs @ 25℃, %               2.0
Glass transition temperature℃     54
Tensile strength, N/mm2
PVC to PC                   16
(Cured 40s @ 100mW/cm2, 365nm UV)
Bonded torque strength, Nm
PVC to PVC                 168
(Cured 300s @ 6mW/cm2, 365nm UV)  
GENERAL INFORMATION：Eye irritant; irritate to skin and skin sensitizer. Contain acrylic. In case of eye contact, flush with water for at least fifteen minutes; get medical attention. Wash with plenty of soap and water after skin contact.Excessive or repeated skin contact may cause skin irritation and skin sensitizer. If skin reaction occurs, discontinue use and consult a physician.
Storage :KEEP MATERIAL AWAY FROM CHILDREN.Maximum shelf life may be obtained when product is stored in a cool, dry location at a temperature between 10°C to 26°C  TO PREVENT CONTAMINATION OF UNUSED PRODUCT, DO NOT RETURN ANY PRODUCT TO ITS ORIGINAL CONTAINER.
Pack ：250gm or 1000gm
Note:The data contained herein are furnished for information only and are believed to be reliable.IF YOU HAVE ANY QUESTIONS PLEASE CONTACT SHENZHEN BAOFANGDA TECHNOLOGY CO.LTD.