Glass bond glass

PRODUCT DESCRIPTION：3101 is a single component, UV light curable bonding adhesive.TYPICAL PROPERTIES OF UNCURED MATERIAL:
Chemical Type                Acrylate
Appearance         Transparent amber liquid
Viscosity @ 25℃, mPa.s         80±20
TYPICAL CURING PERFORMANCE:BFD UV3101 can be cured by irradiation with ultraviolet of sufficient intensity. To obtain full cure on surfaces exposed to air, the enough intensity of UV radiation at 200 to 400 nm is necessary .
Surface Cure Time  Not available
Depth of curing（20S@ 6mW/cm2 , 365nm UV）:    2.0mm
TYPICAL PROPERTIES OF CURED MATERIAL:
(Cured 40 seconds @ 100 m W/cm2 using a high pressure mercury light source)
Physical Properties
Hardness (Shore D),               55
Tensile strength,  /Mpa            70
(Cured 40s @ 100mW//cm2, 365nm UV)
Bonded torque strength, /Mpa        18
glass to glass,(Cured 300s @ 6mW/cm2 , 365nm UV)
Water absorption         
24 hrs @ 25℃, %               1.2
Glass transition temperature(℃)           80
GENERAL  INFORMATION：Eye irritant; irritate to skin and skin sensitizer. Contains acrylic. In case of eye contact, flush with water for at least fifteen minutes; get medical attention. Wash with plenty of soap and water after skin contact.Excessive or repeated skin contact may cause skin irritation and skin sensitizer. If skin reaction occurs, discontinue use and consult a physician.
Storage :KEEP MATERIAL AWAY FROM CHILDREN.Maximum shelf life may be obtained when product is stored in a cool, dry location at a temperature between 10°C to 26°C ,TO PREVENT CONTAMINATION OF UNUSED PRODUCT, DO NOT RETURN ANY PRODUCT TO ITS ORIGINAL CONTAINER.
Pack ：50gm ,250gm or 1000gm
Note:The data contained herein are furnished for information only and are believed to be reliable.IF YOU HAVE ANY QUESTIONS PLEASE CONTACT SHENZHEN BAOFANGDA TECHNOLOGY CO.LTD.