Glass bond metal

PRODUCT DESCRIPTION：BFD uv 3306  is a single component, UV light curable bonding adhesive which is used to bond glass/metal(aluminium,stainless steel).
TYPICAL PROPERTIES OF UNCURED MATERIALT:
Chemical Type               Acrylate
Appearance      Transparent amber liquid
Viscosity @ 25℃, mPa.s        1000±20
TYPICAL CURING PERFORMANCE:BFD uv 3306 can be cured by irradiation with ultraviolet of sufficient intensity. To obtain full cure on surfaces exposed to air, the enough intensity of UV radiation at 200 to 400 nm is necessary .
TYPICAL PROPERTIES OF CURED MATERIAL
(Cured 40 seconds @ 100 m W/cm2 using a high pressure mercury light source)
Physical Properties
Hardness (Shore D),             55
Water absorption,      24 hrs @ 25℃, %               1.8
Glass transition temperature℃          52
Torsion strength of glass/ aluminium  cake which diameter is 30mm            17
(Curing: 300s @ 6mW/cm2 , 365nm UV)
GENERAL INFORMATION:Eye irritant; irritate to skin and skin sensitizer. Contains acrylic. In case of eye contact, flush with water for at least fifteen minutes; get medical attention. Wash with plenty of soap and water after skin contact.Excessive or repeated skin contact may cause skin irritation and skin sensitizer. If skin reaction occurs, discontinue use and consult a physician.
Storage :KEEP MATERIAL AWAY FROM CHILDREN.Maximum shelf life may be obtained when product is stored in a cool, dry location at a temperature between 10°C to 26°C ,TO PREVENT CONTAMINATION OF UNUSED PRODUCT, DO NOT RETURN ANY PRODUCT TO ITS ORIGINAL CONTAINER.
Pack ：250gm or 1000gm
Note:The data contained herein are furnished for information only and are believed to be reliable.IF YOU HAVE ANY QUESTIONS PLEASE CONTACT SHENZHEN BAOFANGDA TECHNOLOGY CO.LTD.